Product

Vacuum bag film AIRSAFETYAIRSAFETY is a series of heat-resistant and high-temperature nylon vacuum bag films, with a temperature resistance range from 160-246 C and high tensile strength. It can be used in curing furnaces and hot-pressing tanks. It has good barrier properties under high temperature and high pressure, and is suitable for a variety of resin system vacuum bag processes

Use with a vacuum bag to create a sealed space. The operating temperature is from room temperature to high temperature of 425 C, which can meet the use conditions of different working conditions

The release cloth has a variety of uses. Firstly, it keeps the surface of the part from adhering to the vacuum consumables. Secondly, it keeps the surface of the part with a consistent texture, which is conducive to secondary bonding or painting. After the release, the release cloth can also be left on the part as a protective layer when the part is trimmed or assembled. It can be selectively remo...

The release film is used to isolate the part from the gas permeable layer and to control the amount of resin that leaks out. The release film has small holes in a known pattern that can squeeze trapped air and excess resin out of the laminate.For prepreg parts in autoclaves (or very thin parts compacted in ovens), non-porous release membranes are usually used. By keeping all the resin in the part,...

Breathable materials and exhaust materials play two roles respectively, but usually at the same time. The role of exhaust materials is to absorb excess resin that "flows out" from the ply, which is usually discharged through a perforated release film (sometimes just a peel layer). The role of "breathable materials" is to create a vacuum over the entire surface, allowing air to ...

Comes with silicone or non-silicone adhesive - it is designed to leave no residue or contaminants